Approved Miele Partner 2024 Miele PW 6321
13-32 Kg Washer-Extractors
Key Features
Powerplus: A performance that offers more with powerful heater elements for fast heat–up and short cycles. Large drum volume for high laundry loads and intelligent solutions for reliable results – Professional, commercial technology.
Careplus: The patented honeycomb drum ensures laundry is cared for. The profiled pattern on the drum creates a protective film of water on which clothing gently slides.
Flexplus: Profitronic M controls – Freely programmable. Standard programme packages and a total of 199 programme slots. The graphic display combines symbols and text for easy programming and programmes are selected via a rotary dial. The temperatures, holding times, wash times, drum rhythms, spin speeds and dosing are all programmable to suit your needs. Chip card reader fitted as standard.
Ecoplus: A sustainable, cost–effective performance, achieving optimum results using as little water, energy and detergent as necessary. Robust design using recyclable materials for maximum sustainability.
Comfortplus: A simple, user–friendly solution when selecting programmes by using rotary switch and pushbuttons. With a large drum opening for simple loading and unloading.
Miele PW 6321 Commercial Washing Machine Price
Whether you want to rent, lease or buy – Simply drop your requirements in the Form Below and we’ll get back to you with a price on the Miele PW 6321 Commercial Washing Machine, fast.
PW 6321 Specs
Design |
|
| Suitable for stacking | – |
| Door opening Frontloader: [Ø mm] | 370 |
| Door opening: Unclean side / clean side [mm] | – |
| Opening angle | 180 |
Capacity |
|
| Max. load [kg] | 32 |
| Honeycomb drum volume [litres] | 320 |
Moisture control |
|
| Spin speed [max. rpm] | 1000 |
| g factor | 448 |
| Residual moisture % | 53 |
Controls |
|
| PROFITRONIC M | X |
| Slot for communication module | X |
Dispenser systems |
|
| 4 compartment dispenser in machine front | – |
| 5 compartment dispenser drawer | X |
Connection options |
|
| External liquid dispensing interface | O |
| Communication module with serial interface | O |
| Payment system | O |
| Peak load cut-out | O |
Plumbing |
|
| 2 x Cold water 1/2” with 3/4” threaded union | – |
| 1 x Hot water, 1/2” with 3/4” threaded union | – |
| Cold water valve for liquid dispensing, 3/4” threaded union | – |
| 1 x cold water, 3/4” with 1” threaded union | X |
| 1 x hot water, 3/4” with 1” threaded union | X |
| 1 x hard water, 3/4” with 1” threaded union | X |
| Min. flow pressure 100 kPa (1 bar) | |
| Max. flow pressure 1000 kPa (10 bar) | |
| Drain pump DN 22 | – |
| Dump valve DN 70 | X |
Heating |
|
| Electric (EL), Gas (G), Steam (D) | EL/G/D |
Electrical connection (electric heating) |
|
| 3N AC 380-415 V 50-60 Hz | 31 kW / 3 x 63 A |
| 3 AC 440V 60 Hz | 31 kW / 3 x 50 A |
Electrical connection (gas heating) |
|
| 3N AC 380-415 V 50-60 Hz | 5 kW / 3 x 16 A |
Electricalconnection (steam heating) |
|
| 3N AC 380-415 V 50-60 Hz | 5 kW / 3 x 16 A |
Dimensions, weight (electrical heating) |
|
| External dimensions H/W/D [mm] | 1640/1085/1272 |
| Net weight [kg] | 648 |
External finish |
|
| Front stainless steel, lid and sides octoblue, rear panel* | X |
| Lid, sides and rear panel in stainless steel | – |
Sound levels (IEC 704-1 and 704-2-4) |
|
| Wash | |
| Spin | TBA |
Floor load |
|
| Maximum floor load in operation | |
| Frequency | TBA |
* Electro-zinc plated
x Standard feature
o Optional feature
– Feature not available